{"product_id":"stellar-saber-accessory","title":"Stellar Saber Tube","description":"\u003cp\u003eThe Stellar Saber Tube is perforated with hundreds of fine pinholes set out in diagonal rows, so the blade lights up as a drifting field of stars instead of a solid bar. A frosted inner layer sits behind the perforations and feeds every point the same amount of the RGB Critter's light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Clear \u003ca href=\"\/en-intl\/products\/saber-twist-on-cap\"\u003eSaber Twist-On Cap\u003c\/a\u003e is in the box with this tube, at no extra cost.\u003c\/strong\u003e Thread it onto the tip for a brighter blade, and push a \u003ca href=\"\/en-intl\/products\/flow-cap\"\u003eFlow Cap\u003c\/a\u003e over the top of it if you want to run both.\u003c\/p\u003e\n\u003cp\u003eNeeds the \u003ca href=\"\/en-intl\/products\/rgb-critter-tube-adapter-long\"\u003eRGB Critter Tube Adapter\u003c\/a\u003e and an RGB Critter flashlight, both sold separately.\u003c\/p\u003e\n\u003chr class=\"fold\"\u003e\n\u003cp\u003e\u003cstrong\u003eHighlights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHundreds of fine pinholes in diagonal rows, a dense star field\u003c\/li\u003e\n\u003cli\u003eThe smallest openings of any cut saber tube, so each point stays tight and distinct\u003c\/li\u003e\n\u003cli\u003eImpact-resistant polycarbonate tubing\u003c\/li\u003e\n\u003cli\u003ePushes into the RGB Critter Tube Adapter and locks with two set screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes the \u003ca href=\"\/en-intl\/products\/saber-twist-on-cap\"\u003eSaber Twist-On Cap\u003c\/a\u003e in Clear\u003c\/strong\u003e, at no extra cost. The tip end is threaded from the factory, so the cap goes straight on and its built-in reflector bounces light back down the tube for a brighter, fuller blade. Sol ships the White cap, and the Honeycomb, Butterfly and Stellar tubes ship the Clear one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe two end caps stack, so it is never one or the other.\u003c\/strong\u003e Thread the Twist-On Cap on first, then push a \u003ca href=\"\/en-intl\/products\/flow-cap\"\u003eFlow Cap\u003c\/a\u003e over the top of it. Run either cap on its own, or both together\u003c\/li\u003e\n\u003cli\u003eLight painting tubes are a different part: 5 to 29 inch have no threads and cannot take a Twist-On Cap at all, and only the 36 inch is threaded\u003c\/li\u003e\n\u003cli\u003eShips with a protective silicone cap on both ends to keep dust and dirt out in transit. Those are packaging, not a Flow Cap\u003c\/li\u003e\n\u003cli\u003eCovered by AOAM's Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the cut does\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause each opening is tiny the pattern holds its pinpoint shape even at speed, and the body of the tube reads dark between the points. Under a long exposure it lays down fine dotted spirals rather than a broad band.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow it connects\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTwist the RGB Critter Tube Adapter onto the front of your RGB Critter.\u003c\/li\u003e\n\u003cli\u003ePush this tube into the adapter's socket.\u003c\/li\u003e\n\u003cli\u003eTighten the adapter's two set screws with the hex key that comes with it. The six openings along the top of the adapter are light ports, not screws.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eParts you may need\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-intl\/products\/rgb-critter-tube-adapter-long\"\u003eRGB Critter Tube Adapter\u003c\/a\u003e (required)\u003c\/strong\u003e. The mounting end of the tube has no thread, so this is what holds it on your Critter. It twists onto the Critter's front, the tube pushes into its socket, and two set screws lock it down. Skip it only if you already own one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with all RGB Critter Flashlights (sold separately).\u003c\/p\u003e\n\u003c!-- aoam-cap-copy 2026-08-05: twist-on cap moved from 'Parts you may need' into the included contents (Joel confirmed every saber tube ships with one) --\u003e\n\u003c!-- aoam-dupe-copy 2026-08-09: intro, first two Highlights bullets and the \"What the cut does\" section rewritten per pattern. Before this, Butterfly\/Stellar\/Honeycomb shared 98% identical body copy, which is what Google Search Console reported as \"Duplicate without user-selected canonical\". Pattern descriptions were taken from the hero photos, not invented. --\u003e\n\u003c!-- aoam-cap-clarity 2026-08-11: Twist-On Cap named as INCLUDED above the fold, colour stated (White with Sol, Clear with the patterned tubes), and the Twist-On Cap + Flow Cap stack spelled out. Joel: \"the saber twist on cap can be used along with the flow cap\". --\u003e","brand":"Ants on a Melon, Inc.","offers":[{"title":"6 Inch (15cm)","offer_id":45672306835681,"sku":"ACC249","price":25.0,"currency_code":"USD","in_stock":true},{"title":"12 Inch (31cm)","offer_id":45672306868449,"sku":"ACC250","price":25.0,"currency_code":"USD","in_stock":true},{"title":"18 Inch (46cm)","offer_id":45672306901217,"sku":"ACC251","price":40.0,"currency_code":"USD","in_stock":true},{"title":"24 Inch (61cm)","offer_id":45672306933985,"sku":"ACC252","price":40.0,"currency_code":"USD","in_stock":true},{"title":"30 Inch (76cm)","offer_id":45672306966753,"sku":"ACC253","price":55.0,"currency_code":"USD","in_stock":true},{"title":"36 Inch (92cm)","offer_id":45672306999521,"sku":"ACC254","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0018\/5483\/2692\/files\/stellar-green-side_82a73100-b51e-4571-9a62-eff6dfb850ed.png?v=1742593623","url":"https:\/\/antsonamelon.com\/en-intl\/products\/stellar-saber-accessory","provider":"Ants on a Melon, Inc.","version":"1.0","type":"link"}