- RGB Critter BTThe app-controlled flashlight.
- Flow Art KitsSwap heads. Keep the light.
- Light Painting ToolsSwap mods. Shape the light.
- Flow Art AccessoriesGrab spares. Keep it spinning.
RGB Critter Tube Adapter - Short
Twists on and grips a 1 inch tube. The short one.
Twists on and grips a 1 inch tube. The short one.
WRITE REVIEW
The RGB Critter Tube Adapter - Short is a twist-on tube holder for the RGB Critter BT. The back threads straight onto the Critter's front thread; a 1 in (25.4 mm) OD tube slides into the bore and locks with two stainless set screws. The tube itself is not included.
Short or Long?
Both twist onto the RGB Critter BT and hold any 1 in (25.4 mm) tube with two set screws, and the Critter carries a long tube just fine with either one. The difference is light and length.
Short, $29.95. A solid body with no light ports, so no stray light leaks into your light paintings. At 33 mm and 28 g it uses less aluminum, so it costs less. Our pick for light painting and Saber Chucks, and the one in our light painting kits and the Saber Chucks Kit.
Long, $34.95. 56 mm with six light ports that glow as you spin, and it grips about twice as much tube. Our pick for saber and staff spinning, and the one in the Saber Kit and the Saber Whip Combo Kit.
What's included + features Show less
Specifications
- Length 33 mm (1.3 in), outside diameter 33 mm (1.3 in)
- Weight 28 g (1.0 oz), bare part
- 6061 aluminum, sandblasted and anodized
- Two M4 x 3 mm stainless set screws, 2 mm hex
- No light ports on this size
- Fits 1 in (25.4 mm) OD saber, staff and light painting tubes
What's included
- 1x RGB Critter Tube Adapter - Short
- 2x M4 x 3 mm stainless set screws, preinstalled
- 1x 2 mm Allen key
- Not included: the tube itself






