Black Friday: up to 30% off, ends Dec 1
- RGB Critter BTThe app-controlled flashlight.
- Flow Art KitsSwap heads. Keep the light.
- Light Painting ToolsSwap mods. Shape the light.
- Flow Art AccessoriesGrab spares. Keep it spinning.
A pair of LED nunchucks in one box. Nothing else to buy.
Got two Critters already?Add just the Saber Chuck Connector for $41.00
A pair of LED nunchucks in one box. Nothing else to buy.
WRITE REVIEW
Two lights, two short sabers, one Saber Chuck Connector between them. A pair of LED nunchucks, ready to spin out of the box.
Pattern: Sol is an even unbroken glow, Honeycomb a clean hexagon grid, Butterfly bold diagonal stripes, Stellar a subtle scatter of stars. Each handle takes its own pattern, so match them or mix two.
Each handle is an RGB Critter BT with a 6 inch saber tube on the front, so it's about a foot long, the usual nunchuck size. At the back, the Saber Chuck Connector swaps out each Critter's end cap for a machined aluminum cap, and 3 inches of 550 paracord join the two. The cord is knotted inside each cap, so the knot sits hidden in the aluminum and the pull runs straight down the middle of the handle.
Both lights run independently or together from the app, so the two handles can match, mirror or play off each other.
What's included
Features
Pick a pattern for each chuck, matched or mixed.
What’s in the box
Everything marked here ships in the kit, two of each plus one connector. Every piece is sold on its own too, so you can replace, upgrade or add to it later.
Silicone Saber CapOptional
Twist-On CapFree with tube
6 Inch Saber Tubefrom $9.95
Tube Adapter, Short$29.95
RGB Critter BT$149.95
Saber Chuck Connector$39.95Also in the box: a 2500mAh battery and USB-C cable with each Critter, the adapters’ set screws and hex key, and three extra paracords (6, 7 and 8 inch).
Materials and durability
Machined aluminum at both ends of the light, impact-resistant polycarbonate in the blade and 550 paracord between the handles.

Machined from solid and sandblasted black anodized, 25 g each. The cord’s knot sits hidden inside the aluminum, so the pull runs straight down the middle of the handle.
3 inches of black 550 paracord between the caps, rated around 250 kg. A spare 6 inch, a 7 inch and an 8 inch cord come in the box too: pull one through the hole in each cap and tie a simple knot at the end. The knot holds it in place.
A grippy, impact-resistant silicone housing over the Critter’s aluminum body, so your hand sits on silicone, not bare metal.
Sandblasted and anodized. Two M4 stainless set screws lock the tube in, tightened with the hex key in the box.
Impact-resistant polycarbonate with a 3mm wall and minimal flex. Sol is diffused white; Honeycomb, Butterfly and Stellar use a clear tube. The tip thread is built into the tube itself, with no aluminum fittings.
The Twist-On Cap is threaded hard plastic, with a reflector underneath that aims the light back down the tube. Optional Silicone Saber Caps push on over it to protect the tube ends from drops and impact.
Every part comes off again and is sold on its own, so you can replace, upgrade or add to it later. Covered by our 2-Year Warranty.
Both handles come in the pattern you pick.

An even unbroken glow.

A clean hexagon grid.

Bold diagonal stripes.

A subtle scatter of stars.
Every part comes off again, so the same two lights still work as flashlights, sabers or anything else in the twist-on range.

Unscrew the end cap from the back of each Critter and screw a connector cap on in its place. The cord’s knot sits hidden inside the aluminum.

The tube adapter twists on, the tube pushes into its socket, and two set screws lock it down with the hex key in the box.

The twist-on cap threads onto the far end of each tube. Each handle is about a foot long, the usual nunchuck size.
No phone, no pairing. Switch it on and they are already there.
Some modes flash quickly. If flashing light affects you, pause the motion.
Every setting on the light, from your phone. Free on iPhone and Android.
Strobe modes flash rapidly and can trigger seizures, even in people with no history of epilepsy. Stop if anyone feels unwell, and never shine it into anyone's eyes.
Powered by the RGB Critter. These numbers are for the light engine itself.
Replaceable 2500 mAh 18650 battery
Built-in USB‑C charging
Soft, grippy silicone grip
3 illuminated RGB buttons
Aluminum body
Connects to 200+ twist‑on accessories
WE HAVE SOME ANSWERS!
Modular by design
Every saber, staff and contact saber is built on the same RGB Critter BT Light Engine, threaded at both ends. Pick a build and watch it come apart.
RGB Critter BT Light Engine
On its own it is a color-changing flashlight. The end cap twists off to reveal the second thread, and that is where every build starts.
Saber Kit
Front: tube adapter, saber tube, twist-on cap and a clear Silicone Saber Cap over it. Back: the end cap moves onto a handle extension.
Contact Saber Kit
Same front as the saber. Back: a second handle extension and the counterweight kit with a black Silicone Saber Cap, so it balances for contact moves.
LED Staff Kit
Back: a second Critter, joined by the Critter Connector. Front: a saber tube on each end, each tipped with a clear Silicone Saber Cap, 24.5 to 84.5 inches overall.
Same front thread, no adapter needed
This lithium-ion battery cannot be shipped internationally and cannot be added to your cart.
You can purchase the required battery locally with these specifications:
Do not purchase protected, button top, 3.2V, or 1.5V cells.
Ants on a Melon is not responsible for batteries purchased from third-party sellers. Please verify specifications and use only high-quality lithium-ion cells from reputable brands.