RGB Critter Tube Adapter - Long
Twists on and grips a 1 inch tube for spinning.
Twists on and grips a 1 inch tube for spinning.
WRITE REVIEW
The RGB Critter Tube Adapter - Long is a twist-on tube holder for the RGB Critter BT. The back threads straight onto the Critter's front thread; a 1 in (25.4 mm) OD tube slides into the bore and locks with two stainless set screws. The tube itself is not included.
This is the long 56 mm size. It grips roughly twice as much tube as the short adapter, which is what a spinning saber needs, so this is the one for flow arts, staffs and any build that gets swung. Six light ports let the Critter's light spill through while you spin. If you are building a Flow Chuck, or you only need to carry a tube for light painting, the RGB Critter Tube Adapter - Short is the smaller, lighter option.
What's included + features Show less
Specifications
- Length 56 mm (2.2 in), outside diameter 33 mm (1.3 in)
- Weight 42 g (1.5 oz), bare part
- 6061 aluminum, sandblasted and anodized outside, polished bare aluminum bore
- Two M4 x 3 mm stainless set screws, 2 mm hex
- Six light ports
- Fits 1 in (25.4 mm) OD saber, staff and light painting tubes
What's included
- 1x RGB Critter Tube Adapter - Long
- 2x M4 x 3 mm stainless set screws, preinstalled
- 1x 2 mm Allen key
- Not included: the tube itself
