Black Friday: up to 30% off, ends Dec 1
- RGB Critter BTThe app-controlled flashlight.
- Flow Art KitsSwap heads. Keep the light.
- Light Painting ToolsSwap mods. Shape the light.
- Flow Art AccessoriesGrab spares. Keep it spinning.
Two lights, one staff, 24.5 to 84.5 inches of it.
Two lights, one staff, 24.5 to 84.5 inches of it.
WRITE REVIEW
A festival-bright, programmable LED staff for flow artists.
Updated summer 2026. This is the latest revision of the kit, not the older version.
Two RGB Critter BT Light Engines joined back to back drive a full staff, 24.5 to 84.5 inches depending on the tube length you pick. Silicone end caps absorb impact and add just enough weight for smooth contact moves and high-speed spins. Use it as a contact staff or as a light up spinning staff. Because it runs on two Critters, the staff in your bag is also two sabers, or a saber and a light painting rig, whenever you want it to be.
Already have a staff with older saber tubes that screw straight into the Critters? It becomes a contact staff the same way: push a Silicone Saber Cap onto each tip, one per end. No weight needed.
Everything you need is in the box: both light engines, batteries, the two tube adapters and the connector. Pick your tube pattern (Sol, Honeycomb, Butterfly or Stellar) and length (6, 12, 18, 24, 30 or 36 inch) when you order.
Why it costs more than a Saber Kit: it runs on two lights, so it adds a second RGB Critter BT, tube, tube adapter and Silicone Saber Cap plus the Critter Connector that joins them, and leaves out the handle extension. Even so, it costs less than those extra parts would on their own.
What's included
How it goes together
The mounting end of a saber tube is bare, with no thread, so the adapters in this kit are what hold the tubes on the lights. The other end of a saber tube is threaded from the factory, which is where the two Saber Twist-On Caps in this kit go. Light painting tubes are different: only the 36 inch length is threaded, and the 5 to 29 inch lengths have no threads on either end.
Features
Common questions
Should I get the LED Staff Kit or a Saber Kit?
The Saber Kit is one light and one blade. The LED Staff Kit runs on two RGB Critter BTs joined back to back, so you get a full staff from 24.5 to 84.5 inches that also comes apart into two sabers, or a saber and a light painting rig. If staff is your prop, get the staff; if you want one blade to start, the Saber Kit is the place.
Which tube pattern should I pick?
It's the same tube, fit and lengths in every pattern, so choose on looks alone. Sol is an even, unbroken glow, Honeycomb a clean hexagon grid, Butterfly bold diagonal stripes, and Stellar a subtle scatter of stars.
Pick a pattern for each saber, matched or mixed.
You get two sabers of the length you pick, joined into one staff.
Everything here ships with your kit.
2xFlashlight
2xSaber tube
2xTube adapter
2xTip cap
Critter Connector
2xSilicone end cap
2x18650 battery
2xUSB-C cableThe details
I'm enjoying 2 sabers as a staff. I also have the inward connection to have 2 flashlights on 1 tube. Still working on a DIY levitation wand. This would be cool as a stand alone product as well to reduce the weight with a different light source or two.
What’s in the box
Two of almost everything, joined in the middle by the Critter Connector. Unscrew it and you are holding two full sabers.
Build your saber
Silicone Saber Cap×2$22.00
Twist-On Cap×2Free with tube
Saber Tube×2from $11.00
Tube Adapter×2$37.00
Critter Connector$26.00
RGB Critter BT×2$184.00Also in the box: two 2500mAh batteries, two USB‑C cables, four set screws and the 2 mm hex key.
No phone, no pairing. Switch it on and they are already there.
Fast flashing shown
at 3 flashes a second
Some modes flash quickly. If flashing light affects you, pause the motion.
Every setting on the light, from your phone. Free on iPhone and Android.
Strobe modes flash rapidly and can trigger seizures, even in people with no history of epilepsy. Stop if anyone feels unwell, and never shine it into anyone's eyes.
Powered by the RGB Critter. These numbers are for the light engine itself.
Replaceable 2500 mAh 18650 battery
Built-in USB‑C charging
Soft, grippy silicone grip
3 illuminated RGB buttons
Aluminum body
Connects to 200+ twist‑on accessories
The Critter Connector is a threaded aluminum adapter that links two RGB Critter flashlights back-to-back-perfect for creating a double-ended light saber.
WE HAVE SOME ANSWERS!
Modular by design
Every saber, staff and contact saber is built on the same RGB Critter BT Light Engine, threaded at both ends. Pick a build and watch it come apart.
RGB Critter BT Light Engine
On its own it is a color-changing flashlight. The end cap twists off to reveal the second thread, and that is where every build starts.
Saber Kit
Front: tube adapter, saber tube, twist-on cap and a clear Silicone Saber Cap over it. Back: the end cap moves onto a handle extension.
Contact Saber Kit
Same front as the saber. Back: a second handle extension and the counterweight kit with a black Silicone Saber Cap, so it balances for contact moves.
LED Staff Kit
Back: a second Critter, joined by the Critter Connector. Front: a saber tube on each end, each tipped with a clear Silicone Saber Cap, 24.5 to 84.5 inches overall.
Same front thread, no adapter needed
This lithium-ion battery cannot be shipped internationally and cannot be added to your cart.
You can purchase the required battery locally with these specifications:
Do not purchase protected, button top, 3.2V, or 1.5V cells.
Ants on a Melon is not responsible for batteries purchased from third-party sellers. Please verify specifications and use only high-quality lithium-ion cells from reputable brands.