RGB Critter Tube Adapter - Short
Twists on and grips a 1 inch tube. The short one.
Twists on and grips a 1 inch tube. The short one.
WRITE REVIEW
The RGB Critter Tube Adapter - Short is a twist-on tube holder for the RGB Critter BT. The back threads straight onto the Critter's front thread; a 1 in (25.4 mm) OD tube slides into the bore and locks with two stainless set screws. The tube itself is not included.
Not recommended for flow arts. The short 33 mm body grips only a small length of tube, so it does not give a spinning saber enough support. Use it for the Flow Chuck build or for light painting, where the tube is carried rather than swung. For flow arts and saber spinning use the RGB Critter Tube Adapter - Long, which grips roughly twice as much tube and adds six light ports.
What's included + features Show less
Specifications
- Length 33 mm (1.3 in), outside diameter 33 mm (1.3 in)
- Weight 28 g (1.0 oz), bare part
- 6061 aluminum, sandblasted and anodized
- Two M4 x 3 mm stainless set screws, 2 mm hex
- No light ports on this size
- Fits 1 in (25.4 mm) OD saber, staff and light painting tubes
What's included
- 1x RGB Critter Tube Adapter - Short
- 2x M4 x 3 mm stainless set screws, preinstalled
- 1x 2 mm Allen key
- Not included: the tube itself
