Currency
Log In OrdersHelp
0 $0.00
Cart.
0
items

Add $99.00 more to get free shipping

3 blades unlock a free holder or blade

Add any 3 blades. Your holder is free if it's in your cart, otherwise your cheapest blade is.
Add a 2nd kit, save $40 + free connector
Subtotal(
0
items):
$0.00
LIFETIME WARRANTY

Shipping:

$9.95Calculated at next step

Lifetime warranty

Total
$0.00
30-day returns 4.7 · 900+ reviews Designed in Oregon

Add to your order

Contact Saber Weight
$19.95
2500mAh 18650 Battery
$9.95
RGB Critter Travel Case
$19.95
BitWhip Travel Case
$29.95
BitWhip Accessory
14 optionsFrom $29.95
DIY Connector
$14.95
Critter Connector
$24.95
Modular End Cap
$19.95
Silicone Saber Cap
2 colors$19.95

Cart

Your cart is empty
Build a kit with only what you need, or start with one of ours.
Build Your Kit
Or shop by category
30-day returns 4.7 · 900+ reviews Designed in Oregon
No light included: the dashed outline shows where the RGB Critter BT you already own fits. Forward Balance Contact Saber built: white saber tube with a silicone saber cap tip, saber mount, black hilt and counterweight, on black.
Forward Balance Contact Saber (No Light) in the Honeycomb pattern, lit orange, shown on an RGB Critter BT light engine. No light included; it runs on the Critter you already own.
Forward Balance Contact Saber (No Light) in the Butterfly pattern, lit blue, shown on an RGB Critter BT light engine. No light included; it runs on the Critter you already own.
Forward Balance Contact Saber (No Light) in the Stellar pattern, lit green, shown on an RGB Critter BT light engine. No light included; it runs on the Critter you already own.
Forward Balance Contact Saber (No Light): everything in the box, including the PTFE shim and connecting screw that lock the Silicone Cap Mount to the Saber Hilt Extension. No light included; runs on the RGB Critter BT you already own.
Forward Balance Contact Saber (No Light) built, with your RGB Critter BT and without it; the gap is where your Critter goes. Balance point marked.
Forward Balance Contact Saber (No Light): two M4 set screws lock the tube in the RGB Critter Tube Adapter Long, 2 mm Allen key included; weighted for flow artists, impact-resistant polycarbonate blade, aircraft-grade black anodized aluminum, grippy streamlined hilt.
Sol Saber Tube, 24 inch (61 cm), impact-resistant polycarbonate.
RGB Critter Tube Adapter, Long: black anodized aluminum, two set screws hold the tube.
Saber Hilt Extension, 92.6 mm black anodized aluminum, threads onto the back of your Critter.
Silicone Saber Cap, Clear: soft silicone, pushes on over the Twist-On Cap at the tip.
Saber Twist-On Cap, white, threads into the tip of the Sol tube.
Silicone Cap Mount: threads onto the back of the hilt, empty bore so you can add a Contact Saber Weight later.
Silicone Saber Cap, Black: closes the back of the saber, pushes on over the Silicone Cap Mount.
Silicone Saber Cap in clear, both ends: the closed back and the open end, the five grip rings visible inside. It caps a saber tube or the back of your hilt.
Silicone Saber Cap in black, both ends: the closed back with the AOAM emblem, and the open end with five grip rings inside. It caps a saber tube or the back of your hilt.
Silicone Saber Cap, built to last: ultra-durable 55 Shore A silicone takes drops and daily practice, flexes over the tube end and springs back, BPA-free, and no glue, clips or batteries to wear out.
Where the Silicone Saber Cap goes, shown to scale: option A, it pushes onto the end of a saber tube; option B, it pushes onto a Silicone Cap Mount fitted in the back of a Saber Hilt Extension or RGB Critter. The mount is sold separately and twists on.
No light included: the dashed outline shows where the RGB Critter BT you already own fits. Forward Balance Contact Saber built: white saber tube with a silicone saber cap tip, saber mount, black hilt and counterweight, on black.
Forward Balance Contact Saber (No Light) in the Honeycomb pattern, lit orange, shown on an RGB Critter BT light engine. No light included; it runs on the Critter you already own.
Forward Balance Contact Saber (No Light) in the Butterfly pattern, lit blue, shown on an RGB Critter BT light engine. No light included; it runs on the Critter you already own.
Forward Balance Contact Saber (No Light) in the Stellar pattern, lit green, shown on an RGB Critter BT light engine. No light included; it runs on the Critter you already own.
Forward Balance Contact Saber (No Light): everything in the box, including the PTFE shim and connecting screw that lock the Silicone Cap Mount to the Saber Hilt Extension. No light included; runs on the RGB Critter BT you already own.
Forward Balance Contact Saber (No Light) built, with your RGB Critter BT and without it; the gap is where your Critter goes. Balance point marked.
Forward Balance Contact Saber (No Light): two M4 set screws lock the tube in the RGB Critter Tube Adapter Long, 2 mm Allen key included; weighted for flow artists, impact-resistant polycarbonate blade, aircraft-grade black anodized aluminum, grippy streamlined hilt.
Sol Saber Tube, 24 inch (61 cm), impact-resistant polycarbonate.
RGB Critter Tube Adapter, Long: black anodized aluminum, two set screws hold the tube.
Saber Hilt Extension, 92.6 mm black anodized aluminum, threads onto the back of your Critter.
Silicone Saber Cap, Clear: soft silicone, pushes on over the Twist-On Cap at the tip.
Saber Twist-On Cap, white, threads into the tip of the Sol tube.
Silicone Cap Mount: threads onto the back of the hilt, empty bore so you can add a Contact Saber Weight later.
Silicone Saber Cap, Black: closes the back of the saber, pushes on over the Silicone Cap Mount.
Silicone Saber Cap in clear, both ends: the closed back and the open end, the five grip rings visible inside. It caps a saber tube or the back of your hilt.
Silicone Saber Cap in black, both ends: the closed back with the AOAM emblem, and the open end with five grip rings inside. It caps a saber tube or the back of your hilt.
Silicone Saber Cap, built to last: ultra-durable 55 Shore A silicone takes drops and daily practice, flexes over the tube end and springs back, BPA-free, and no glue, clips or batteries to wear out.
Where the Silicone Saber Cap goes, shown to scale: option A, it pushes onto the end of a saber tube; option B, it pushes onto a Silicone Cap Mount fitted in the back of a Saber Hilt Extension or RGB Critter. The mount is sold separately and twists on.

Forward Balance Contact Saber (No Light)

WRITE REVIEW

Kit deal
Kit saves $32.80
/
Store reviews 5.0 on Google (65 reviews)58 reviews on Trustpilot
Light not includedRuns on the RGB Critter BT you already own, sold separately.

Every part of our Contact Saber Kit Forward Balance except the light, for the RGB Critter BT you already own. One handle extension and an empty Silicone Cap Mount keep the mass forward, so the lit end leads the turn.

No light engine in this box. It runs on the RGB Critter BT you already own, sold separately.

What's included + features Show less

What's included

  • Saber Tube in the pattern and length you choose: Sol, Honeycomb, Butterfly or Stellar, 18, 24, 30 or 36 inch
  • Saber Twist-On Cap (White on Sol, Clear on the others), mounted on the tube tip
  • Silicone Saber Cap (Clear), pushed on over the Twist-On Cap
  • RGB Critter Tube Adapter - Long, black
  • Saber Hilt Extension
  • Silicone Cap Mount (empty bore, add a Contact Saber Weight later)
  • Silicone Saber Cap (Black)
  • Connecting screw and PTFE shim, which lock the Silicone Cap Mount to the Saber Hilt Extension
  • Set screws (prefitted), plus the 2 mm and 4 mm hex keys to assemble it

Your Critter's own end cap comes off; the black Silicone Saber Cap closes the back.

It costs less than buying the parts separately, and the price box shows your exact saving for the pattern you pick.

Pattern
Length
Price$131.95
Regular price$164.75
You save$32.80
Store reviews 5.0 on Google (65 reviews)58 reviews on Trustpilot
Free US shipping $99+, 30-day returns Free US shipping and 30-day returns
4.7 · 900+
reviews
Free 30-day
US returns
Designed
in Oregon
Goes great with itTap + to add to cart
Contact Saber Weight Contact Saber Weight
$19.95
Spare 18650 battery Spare 18650 battery
$9.95
RGB Critter Travel Case RGB Critter Travel Case
$19.95
Tube $131.95 $131.95
Or get it in a kitLight included
Contact Saber Kit - Forward Balance Forward Balance KitLight + contact saber from$261.95Save $52.75 Contact Saber Kit Contact Saber KitLight + contact saber from$329.95Save $53.70 All kits 11 kitsShop all

2-year warrantyDefects in materials or workmanship are covered for 2 years from the date of purchase.

Lifetime upgrade in the cartAdd it and every item in the order is covered for as long as you own it. Batteries are covered for 60 days.

Free 30-day US returnsUnused and in the original packaging, and we email you a prepaid label. International returns are accepted within 30 days, return postage is yours.

Broke in use?That is a warranty claim, with no 30-day limit. Email support@antsonamelon.com and we repair or replace it.

Full warranty policy  ·  Full return policy
Forward Balance Contact Saber (No Light)
Forward Balance Contact Saber (No Light)
Kit deal
Sol · 24 Inch (61cm)
Change
Kit saves $32.80
/
0 $0.00

FLOW SABERS. BUILD YOUR KIT.

Shop all

Transform your light art with our modular light painting tubes. Designed for photographers and artists, these customizable tubes let you create stunning long-exposure effects and dynamic light trails.

RGB Critter Tube Adapter - Long

Twists on and grips a 1 inch tube for spinning.

$34.95
Sol Saber Tube

Impact-resistant saber tube, twist-on cap in the box.

4.8 (47), rated 4.8 out of 5 from 47 reviews
From $9.95
Contact Saber (No Light)
From $179.95
Saber Handle Extension

A longer aluminum grip for spinning and contact work.

$39.95
Butterfly Saber Tube

Chevron slots that read as wings down the blade.

4.5 (21), rated 4.5 out of 5 from 21 reviews
From $19.95
Silicone Saber Cap

Friction fits every saber tube we have ever made.

$19.95
Honeycomb Saber Tube

A hexagonal lattice that glows as a grid of cells.

4.7 (29), rated 4.7 out of 5 from 29 reviews
From $19.95
Stellar Saber Tube

Hundreds of pinholes, so the blade lights up as stars.

3.5 (2), rated 3.5 out of 5 from 2 reviews
From $19.95
RGB Critter Tube Adapter - Short

Twists on and grips a 1 inch tube. The short one.

$29.95
Shop all Light Saber Accessories

Added To Cart

Complete your setup:

International Shipping Restriction

This lithium-ion battery cannot be shipped internationally and cannot be added to your cart.

You can purchase the required battery locally with these specifications:

  • 18650
  • Lithium-ion
  • 3.6V nominal
  • Unprotected
  • Flat top
  • 18.3mm diameter × 65.0mm length

Do not purchase protected, button top, 3.2V, or 1.5V cells.

Ants on a Melon is not responsible for batteries purchased from third-party sellers. Please verify specifications and use only high-quality lithium-ion cells from reputable brands.

LIFETIME WARRANTY
Every item in your order, for life.
Our gear comes with a 2-year warranty. This upgrade extends every item in your order to lifetime.
WHAT YOU ALREADY GET
2 years on everything in your order, free. Batteries have their own 60-day warranty, and the Orb has no warranty.
WHAT THIS ADDS
If anything in this order fails from a defect, we repair or replace it for as long as you own it.
NO HASSLE CLAIMS
Email us photos or a short video. Most repairs are back out in 2 to 3 working days.
NOT COVERED
Physical damage such as a cracked or crushed housing, loss, theft, broken fiber strands and normal battery wear.
International duties & VAT
A quick heads-up for orders shipping outside the US.
Set by your destination
Import duties and VAT are charged by your country's customs, not by Ants on a Melon.
Paid on delivery
Your carrier collects any charges when they deliver. Amounts vary by country.
Still fully guaranteed
Every international order is guaranteed to arrive. Need help? Email support@antsonamelon.com