Sol Saber Tube
WRITE REVIEW
The Sol Saber Tube uses impact-resistant tubing built for real dueling, and emits smooth, evenly distributed light.
The White Saber Twist-On Cap is in the box with this tube, at no extra cost. Thread it onto the tip for a brighter blade, and push a Flow Cap over the top of it if you want to run both.
Needs the RGB Critter Tube Adapter and an RGB Critter flashlight, both sold separately.
Full details and specs Show less
Highlights
- Impact-resistant tube for real dueling
- Smooth, evenly distributed light
- Pushes into the RGB Critter Tube Adapter and locks with two set screws
- Includes the Saber Twist-On Cap in White, at no extra cost. The tip end is threaded from the factory, so the cap goes straight on and its built-in reflector bounces light back down the tube for a brighter, fuller blade. Sol ships the White cap, and the Honeycomb, Butterfly and Stellar tubes ship the Clear one
- The two end caps stack, so it is never one or the other. Thread the Twist-On Cap on first, then push a Flow Cap over the top of it. Run either cap on its own, or both together
- Light painting tubes are a different part: 6 to 30 inch have no threads and cannot take a Twist-On Cap at all, and only the 36 inch is threaded
- Ships with a protective silicone cap on both ends to keep dust and dirt out in transit. Those are packaging, not a Flow Cap
How it connects
- Twist the RGB Critter Tube Adapter onto the front of your RGB Critter.
- Push this tube into the adapter's socket.
- Tighten the adapter's two set screws with the hex key that comes with it. The six openings along the top of the adapter are light ports, not screws.
Parts you may need
- RGB Critter Tube Adapter (required). The mounting end of the tube has no thread, so this is what holds it on your Critter. It twists onto the Critter's front, the tube pushes into its socket, and two set screws lock it down. Skip it only if you already own one.
Compatible with all RGB Critter Flashlights (sold separately).



